The Art of Veneers: An Over-the-Shoulder Experience

by Dr. Ed McLaren, Dr. Mehrdad Razaghy and Sam Alawie

Jun 17 to 19, 2027

Beverly Hills, California

Next dates for this course

The Art of Veneers: porcelain veneers on the upper and lower teeth
Dates
Jun 17 to 19, 2027
Location
Beverly Hills, California
Length
3 Days
Format
Hands-On
CE credits
21 CE Credits
Included
Breakfast, coffee, lunch and refreshments throughout the course duration

A 3-Day Live Patient Experience in Minimal-Prep & No-Prep Bonded Porcelain Restorations

Course Prerequisite: Participants must have previously completed The Ultimate Veneer: Prep and No-Prep course to be eligible to register for The Art of Veneers. This course is not open to individuals who have not fulfilled this prerequisite.

Minimally Invasive Indirect Bonded Restorations;
Live patient over the shoulder with demo and hands on:

Course Overview:

This is a unique A to Z 3-day hands on course with lectures and demonstrations of all topics, that uses the best concepts of the analog and digital dental world with a minimalistic approach to adhesive restorative dentistry. The course will take past treated patients from Smile design all the way through final cementation. Along with all types of adhesive preparations and cementation techniques, participant will explore and learn the newest technique in optical scanning, digital designing, and 3d printing.

The Art of Veneers: upper front teeth before treatment

For a Live patient exercise there will be two patients one patient that is prepared at the beginning of the course with all the lecture topics and learning objectives covered on that patient and then on the end of the third day, the second patient’s veneers will be cemented.

Lecture topics and Learning Objectives

  • Basics of Smile Design, and Photoshop Smile Design
  • Intra-Oral scanning
  • Digital Mock-ups and 3D printing
  • Analog techniques BFEP’s (Bonded Esthetic Functional Prototypes) i.e. bonded mock-ups
  • Indications and Contra-indications for minimally invasive bonded veneers, inlays, onlays, and vonlays
  • Step-by-step Preparation Techniques SPECIFIC TO THE PATIENT for anterior minimally invasive bonded veneers. Preop printed Cast of the patient will be generated and if a high strength printable resin 3-D printed mock up technique will be shown on this model, and preparation’s specific to the treated patient.
  • Margin Elevation techniques and materials
  • Material Selection (what to use, when and where)
  • Shade Analysis
  • Digital Design for Temporaries and Final Restorations
  • 3D Printed Same Day Chair Side Temporaries
  • New 3D printed Indirect Restorative materials
  • Step-by-step Adhesive Cementation materials and techniques specific to this patient.
The Art of Veneers: final porcelain veneers after cementation

Demonstration and Hands-on topics

Participants will complete all the techniques lectured and demonstrated about using casts and a specially designed typodont, digital scanners, and 3D digital printers.

The Art of Veneers: the smile before treatment
  • Operate and capture images using the Chairside Medit scanner with the application of materials used for ideal image capture.
  • Basic 3D design for esthetic case, how to design anterior veneers.
  • 3D printing of Mockup of digital design.
  • Preparations SPECIFIC TO THE PATIENT CONDITIONS ON PRINTED CAST OF PATIENT
  • Cad-Cam specific preparation modification
  • Posterior block out restorations
  • How to Elevate Margins
  • 3D printing of same day temporaries using the latest printers from Sprintray.
  • Printing an Onlay with the new Sprintray Midas Injection printing technology
  • Step by step adhesive technique for veneers using current dental adhesives.
  • Step by step adhesive technique for posterior minimalistic restorations using current materials.

Day 1 - Lecture, DEMO, Hands-on & Live Patient Demonstration

The Art of Veneers: minimal veneer preparations
  • 8:30 AM - 9:00 AM: Registration and continental breakfast
  • 9:AM- 10:30AM: Lecture1:
    Smile Analysis and Digital Smile Design Techniques (PROF/Dr. Ed McLaren, Sam Alawie MDT)
  • 10:30Am-10:45Am: Break
  • 10:45AM-11:45AM: Lecture2:
    Camera selection and camera settings.
    Smile design photography ON LIVE PATIENT
    Macro dental photography ON LIVE PATIENT (PROF/Dr. Ed McLaren, Sam Alawie MDT)
  • 11:45AM-12:30PM: Demonstration:
    Camera selection and camera settings.
    Smile design photography ON LIVE PATIENT
    Macro dental photography ON LIVE PATIENT (PROF/Dr. Ed McLaren, Sam Alawie MDT)
  • 12:30Pm-1:30Pm: Lunch
  • 1:30PM-2:30PM: Hands-on Workshop:
    Demonstration:
    Camera selection and camera settings.
    Smile design photography ON LIVE PATIENT
    Macro dental photography ON LIVE PATIENT
  • 2:30PM-3:30PM: Live Patient BFEP Demonstration:
    Anterior Bonded Functional Esthetic Prototypes (i.e. bonded mock-ups)
    DIGITAL and Analog techniques (PROF/Dr. Ed McLaren, Sam Alawie MDT)
  • 3:30PM-6:30PM: LIVE PATIENT DEMO: Maxillary anterior Etched Ceramic Restoration (ECR) preparations, Impressions, Dentin Sealing Techniques, and Prototypes (PROF/Dr. Ed McLaren, Sam Alawie MDT)

Day 2 - Lecture, Hands-on Workshops & Demonstrations

The Art of Veneers: shade selection and try in
  • 9:00AM - 10:00AM: Lecture:
    Bonded Functional Esthetic Prototypes (i.e. bonded mock-ups) Both Digital and Analog (PROF/Dr. Ed McLaren, Sam Alawie MDT)
  • 9:00AM - 10:00AM: Demonstration:
    Bonded Functional Esthetic Prototypes (i.e. bonded mock-ups) Both Digital and Analog (PROF/Dr. Ed McLaren, Sam Alawie MDT)
  • 10:00Am-10:15Am: Break
  • 10:15AM - 11:30AM: Hands-on Workshop:
    Bonded Functional Esthetic Prototypes (i.e. bonded mock-ups) Both Digital and Analog (PROF/Dr. Ed McLaren, Sam Alawie MDT)
  • 11:30AM - 1:00PM: Lecture:
    Preparations for Anterior Etched Ceramic Restorations (PROF/Dr. Ed McLaren, Sam Alawie MDT)
  • 1:00Pm - 2:00Pm: Lunch Break
  • 2:00PM - 3:15 PM: Demonstration:
    Anterior ECR preparations, block out and margin elevation (PROF/Dr. Ed McLaren, Sam Alawie MDT)
  • 3:15Pm - 3:30 PM: Break
  • 3:30PM - 5:15PM: Hands-on Workshop:
    Anterior and Posterior ECR preparations block out and margin elevation (PROF/Dr. Ed McLaren, Sam Alawie MDT)

Day 3 - Lecture, Hands-on Workshops & Live Patient Demonstrations

The Art of Veneers: surface texture on the model
  • 9:00AM - 10:30 AM: Lecture:
    Criteria for Indirect material selection (PROF/Dr. Ed McLaren, Sam Alawie MDT)
  • 10:30Am-10:45Am: Break
  • 10:45AM-12:00PM: Lecture:
    Step by Step Process for try-in, shade adjustment, and adhesive cementation of anterior ECR’s (PROF/Dr. Ed McLaren, Sam Alawie MDT)
  • 12:00PM - 1:00PM: Demonstration:
    Step by Step Process for try-in, shade and adhesive cementation of anterior ECR (PROF/Dr. Ed McLaren, Sam Alawie MDT)
  • 1:00Pm-2Pm: Lunch Break
  • 2:00PM - 3:00PM: Hands-on Workshop:
    Step by Step Process for try-in, shade and adhesive cementation of anterior ECR (PROF/Dr. Ed McLaren, Sam Alawie MDT)
  • 3:00 PM - 6:00 PM: Live Patient Demonstration: Step by Step Process for try-in, shade adjustment, and adhesive cementation of anterior ECR’s case that was prepared FROM PREVIOUS COURSE (PROF/Dr. Ed McLaren, Sam Alawie MDT)

End of Course

Who should take this course: Dentists

The Art of Veneers: veneer preparations on the upper front teeth

Course photos

  • The Art of Veneers: upper front teeth before treatment
  • The Art of Veneers: final porcelain veneers after cementation
  • The Art of Veneers: the smile before treatment
  • The Art of Veneers: minimal veneer preparations
  • The Art of Veneers: shade selection and try in
  • The Art of Veneers: surface texture on the model
  • The Art of Veneers: veneer preparations on the upper front teeth
  • The Art of Veneers: finished porcelain veneers
  • The Art of Veneers: patient portrait
  • The Art of Veneers: patient portrait